Tyresome

A few photos of adapting La Jet Sept's cycle wing stays to allow Yoko 195/50/15s to be fitted in place of discontinued CR500 195/45/15s. Wires to indicator repeaters and daytime running lights were removed. Stays were cut about two thirds up from the hub fixing. Attachment angle to hub fitting plate adjusted and rewelded. Rod and sleeves welded in to achieve extension. Painted, before wires soldered back together and insulated with heat shrink, and run externally with cable ties. I think that was it!

Comments

The top photo is the finished article. The others more or less follow the process.

JetSepter