Zetec - Fuel pressure on Raceline 200BHP

8 posts / 0 new
Last post
Supersprint1988
Supersprint1988's picture
Offline
Last seen: 6 years 5 months ago
Joined: 17/04/2014
Zetec - Fuel pressure on Raceline 200BHP
What fuel pressure are the good people of BC running on their Raceline 200BHP Zetec ( fuel rail pressure ) ??? Thanks Carsten
Pezky
Pezky's picture
Offline
Last seen: 5 years 11 months ago
Joined: 17/04/2014
Hi Carsten Not sure about the pressure but mine has a SYTEC FP603 fuel pump if that helps\" class=\"smiley\" /> Jonathan
Supersprint1988
Supersprint1988's picture
Offline
Last seen: 6 years 5 months ago
Joined: 17/04/2014
Thanks. But it is more the setting of the fuel pressure regulator I would like to know
Phil B
Phil B's picture
Offline
Last seen: 1 month 3 weeks ago
Joined: 17/04/2014
Hello Carsten, Fuel pressure depends on the injectors being used. Typical for the Bosch/Pico injectors used in the Jenveys is 3.0 - 3.5 Bar depending on their optimised nozzle design and flow rate. I recommend that you drop either Omex or Jenvey an email. Andy Cornock at Omex is really fantastic at replying to requests for advice, and as they offer your engine spec as one of their new line of pre-built engines, I'm sure he would point you in the right direction. Alternatively give Pete at Raceline a call, he is based at their new workshops, if Pete picks-up when you call great, but if he's busy you'll need to keep calling back. Phil
Pezky
Pezky's picture
Offline
Last seen: 5 years 11 months ago
Joined: 17/04/2014
If it came with the Raceline kit, I think it is preset
Doug
Offline
Last seen: Never ago
Joined: 17/04/2014
The easy way to get an answer to this is to give Pete McEwan at Raceline a ring. He's very helpful and you can get hold of him at: Workshop: Raceline Limited Netley Old Hall Farm Netley Shrewsbury Shropshire SY5 7JY Email: [email protected] Tel: 01743 718646
Guy Lowe
Guy Lowe's picture
Offline
Last seen: 4 hours 4 min ago
Joined: 17/04/2014
Pete at Raceline say's 3 bar, Andy at Omex say's 3 bar and when Richard at Omex put mine on his RR he said 3 to 3.5 if ideal. So I rum mine at 3 bar \" class=\"smiley\" /> Guy

 

 

Supersprint1988
Supersprint1988's picture
Offline
Last seen: 6 years 5 months ago
Joined: 17/04/2014
Thank you Gents These where the answers I was looking for. Cheers \" class=\"smiley\" /> Carsten