21 posts / 0 new
Last post
Brightonuk
Brightonuk's picture
Offline
Last seen: 1 day 8 hours ago
Joined: 03/05/2018
Dash Template

Can anyone supply me with a standard S3 dash template? 

I am looking to redo mine in a custom config. leaving out a couple of switches but I know if I try to wing it things will not line up.

Thanks 

Steve

 

John Vine
John Vine's picture
Offline
Last seen: 11 hours 21 min ago
Joined: 17/04/2014

The only sources that come to mind are Arch or CC themselves (in other words, whoever cut the original holes).

LHD presumably?

JV
 

Tony P
Offline
Last seen: 10 hours 37 min ago
Joined: 13/06/2017

I made one (of the standard issue type) before drawing up a revised layout for Bruce at Arch to make a custom dash for me (I ended up cutting some of the apertures myself though). I can't be certain that I'll be able to find it in a hurry... 

EDIT:
Ah, sorry... LHD?  Would it be a mirror image of RHD or something different?
 

Tony Pashley

Brightonuk
Brightonuk's picture
Offline
Last seen: 1 day 8 hours ago
Joined: 03/05/2018
Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD

Life Can Be Crule

Brightonuk
Brightonuk's picture
Offline
Last seen: 1 day 8 hours ago
Joined: 03/05/2018
Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD

Life Can Be Crule

Brightonuk
Brightonuk's picture
Offline
Last seen: 1 day 8 hours ago
Joined: 03/05/2018
Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD

Life Can Be Crule

Brightonuk
Brightonuk's picture
Offline
Last seen: 1 day 8 hours ago
Joined: 03/05/2018
Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD

Life Can Be Crule

Brightonuk
Brightonuk's picture
Offline
Last seen: 1 day 8 hours ago
Joined: 03/05/2018
Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD

Life Can Be Crule

Brightonuk
Brightonuk's picture
Offline
Last seen: 1 day 8 hours ago
Joined: 03/05/2018
Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD

Life Can Be Crule

Brightonuk
Brightonuk's picture
Offline
Last seen: 1 day 8 hours ago
Joined: 03/05/2018
Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD

Life Can Be Crule

Brightonuk
Brightonuk's picture
Offline
Last seen: 1 day 8 hours ago
Joined: 03/05/2018
Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD

Life Can Be Crule