Titanium wheel arch/stone protectors

13 posts / 0 new
Last post
James B
James B's picture
Offline
Last seen: 36 min 6 sec ago
Joined: 17/04/2014
Titanium wheel arch/stone protectors

Does anyone know if Richard Jones (Richcat7) is still supplying these?  I'm interested in a pair but am having some difficulty in getting a response from him. 

Alright, I only mailed him last night but I'm an impatient b*gger at times and I just thought that someone might know him and advise on the lie of the land.

Any infos??

James

AristoCat
AristoCat's picture
Offline
Last seen: 6 hours 44 min ago
Joined: 17/04/2014

I don't believe he has access to the material and kit anymore.  Hopefully he'll be along to confirm at some point.

Mrp
Mrp's picture
Online
Last seen: 1 min 40 sec ago
Joined: 17/04/2014

I'll send you a blat mail

 

 

DJ.
DJ.'s picture
Offline
Last seen: 32 min 37 sec ago
Joined: 17/04/2014
I'd be quite keen if a batch were made Smile Duncan
James B
James B's picture
Offline
Last seen: 36 min 6 sec ago
Joined: 17/04/2014

Yes, I'm sure we're 'overdue' for one, so I'd expect plenty of demand.  Still no sign of Richard, though, unfortunately...

James

Mrp
Mrp's picture
Online
Last seen: 1 min 40 sec ago
Joined: 17/04/2014

I've got a new set of new unused (still in the original newspaper wrapping) symmetrical ones suitable for rear wings that are the same both sides. Unfortunately they were not suitable for James car.

Mrp

 

 

James B
James B's picture
Offline
Last seen: 36 min 6 sec ago
Joined: 17/04/2014

Yes, sorry Mrp, I should have flagged that up when DJ posted.  My wings are the non-symmetrical types (the N/S is less tall than the O/S) so two identically sized - but handed - protectors, as Mrp has, won't work on my car.

James

DJ.
DJ.'s picture
Offline
Last seen: 32 min 37 sec ago
Joined: 17/04/2014

Message sent to Mrp.

Duncan

James B
James B's picture
Offline
Last seen: 36 min 6 sec ago
Joined: 17/04/2014

Do I get my commission from DJ or Mrp?? Rofl

James

Ed White
Offline
Last seen: 5 hours 54 min ago
Joined: 18/04/2014

I do a lot of laser and waterjet cutting. I can probably source these. Is the common "set" the miss-matched pair. I'd also need either a drawing, or an old pair of standard ones to draw. After that I suppose its an indication of numbers to be able to sort a price. 1 pair would be expensive, 10 better, 20 better still etc. Cheers, Ed

 

Alan Reeves
Offline
Last seen: 8 hours 23 min ago
Joined: 17/04/2014

I have my old stone guards from a CSR and 175 Supersport.

The CSR has a shorter driver side guard , I cannot remember why but....

The 175 which is the same as todays 360/420 I would think and they are equal length both sides.

I am happy to loan these for copying but really not keen on posting, im in sussex

I might have richards tele number from a few years back 

Alan

test