paul jacobs Posted February 28, 2020 Share Posted February 28, 2020 Image 3 piece alloys wheels with CSR offsets. Slightly wider than standard, but will still accept standard CSR tyre sizes. 2 Fronts and 2 rears available. £750.1 pair of black wider rear wings to cover wider rear wheels above. £65Omex 710 ECU with harness adaptor with custom 260 map installed. Fully programmable. Will plug straight into the Caterham loom with no modifications. Cost over £1200. £750 7" Silencers, one repackable. - £195. One standard 7" 'quiet'. Caterham unit. - £95Front lower Aero CSR wishbone, believed left hand side. £50'Powered by Cosworth' Duratec carbon coil cover £150Carbon nosecone whiskers. Unused. £60 pairPropshaft off a CSR but possibly fit a Duratec SV too. Only done 7,000 miles. £953.38 Ford Diff. - not one of the noisy ones. These are very hard to find now. £6503.6 Ford Diff unused, still boxed. Ford manufactured, not refurbished. £925Half hood with double zip-outs and rear cover for parking. Would also fit an SV. £295CSR/SV tonneau covers with and without headrest pockets £175CSR/SV Sidescreens c/w armrests. £225 pairAll prices are negotiable but please don't insult me with a ridiculously low offer. Thanks. Paul. Link to comment Share on other sites More sharing options...
Ian B Posted February 28, 2020 Share Posted February 28, 2020 Paul, will msg you re rear wings and coil cover please Link to comment Share on other sites More sharing options...
Leadership Team Shortshift Posted February 28, 2020 Leadership Team Share Posted February 28, 2020 Hi PaulWill blatmail you about the 3.38 diff.James Link to comment Share on other sites More sharing options...
Bigape Posted March 1, 2020 Share Posted March 1, 2020 I would be interested in the half good with zip outs Link to comment Share on other sites More sharing options...
paul jacobs Posted March 2, 2020 Author Share Posted March 2, 2020 Hi Bigape,Let me have your email address and I'll be happy to PM you some pictures etc.It will also fit a standard SV as the dimensions are the same.I'm sorry to see it go, as it is such a good bit of kit, but it won't fit a standard S3 and I am unlikely to have another CSR or an SV.Paul. Link to comment Share on other sites More sharing options...
Leadership Team Shortshift Posted March 8, 2020 Leadership Team Share Posted March 8, 2020 Just to say that, although I expressed interest in Paul's 3.38 diff, I have found today that this is the ratio that is already fitted to my car (dohh!) so I won't be buying. I have, of course, let Paul know, but I wanted to make it clear that "I'm out" in case anyone else was interested.And a free bump back to the top as well!James Link to comment Share on other sites More sharing options...
paul jacobs Posted March 13, 2020 Author Share Posted March 13, 2020 Thanks for the post and leg up James.The coil cover and the pocketed tonneau are now sold.As mentioned, all prices are negotiable, so if you think there may be something of interest, but the price shown is unrealistic, don't hesitate to make me an offer, I can only say No, but I could also say OK. Link to comment Share on other sites More sharing options...
Ian B Posted March 13, 2020 Share Posted March 13, 2020 Paul, have emailed you Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now