For Sale Carbon Handbrake Handles

41 posts / 0 new
Last post
mark_w
mark_w's picture
Offline
Last seen: 16 hours 17 min ago
Joined: 15/10/2014
For Sale Carbon Handbrake Handles

Have made a small batch of these while I was making one for myself, they are 30mm dia 120mm long , diagonal style weave, 2 different style anodised aluminium ends with 2x M5 grub screw fixing.

I have tried to simplify  the fitting by machining out a bit of clearance for the weld that is found under the handle once the grip is removed. cost is £50 inc postage,

Marketplace

For Sale
gileshudson
Offline
Last seen: 12 hours 35 min ago
Joined: 17/04/2014

Nice looking bit of kit Mark. I have the same but made by young Carsten over in Germany.
Looks great and feels good to the touch too.
Top work that man! Wonder if I could find somewhere to use another one on the car... Dzus screwdriver holder maybe!

Giles Hudson
AR Working Group
AR - Bear 7s

manningpaul
manningpaul's picture
Offline
Last seen: 1 day 21 hours ago
Joined: 17/04/2014
Hi Mark, YHM. Regards Paul.
Frogman
Frogman's picture
Offline
Last seen: 3 days 23 hours ago
Joined: 20/09/2017
PM sent, nicely executed.

Move fast, stay low.

K7 VCT
K7 VCT's picture
Offline
Last seen: 9 hours 12 min ago
Joined: 17/04/2014
Will they fit a metric chassis S3 ?

Orange is my new black

Ballistic orange 310s
rob.mcc45
rob.mcc45's picture
Offline
Last seen: 14 hours 5 min ago
Joined: 14/07/2019

PM sent

mark_w
mark_w's picture
Offline
Last seen: 16 hours 17 min ago
Joined: 15/10/2014

(reply to 5 )Will they fit a metric chassis S3 ?

I think  they should fit all handbrakes but have only fitted to my 2001 imperial chassis, what i will say is if there are any issues I will sort them so your not left without 

That goes for anyone who buys one

Mark

K7 VCT
K7 VCT's picture
Offline
Last seen: 9 hours 12 min ago
Joined: 17/04/2014
Hi Mark, Just measured my grip on a 2014 S3. Its barely 95mm long, but longer hopefully fits ok. How would you remove the plastic grip ?

Orange is my new black

Ballistic orange 310s
mark_w
mark_w's picture
Offline
Last seen: 16 hours 17 min ago
Joined: 15/10/2014

think its glued on some how, mine took a bit of removing with brute force (mole grips) then scraped / sanded the remaining glue off, the limiting factor on the length is underneath the diameter where the gaitor is it drops away at an angle. measure from there to the front of the grip, see what you've got 

K7 VCT
K7 VCT's picture
Offline
Last seen: 9 hours 12 min ago
Joined: 17/04/2014
Hi Mark, I see what me about the angle of the metal. 120mm should be ok as just less than 130mm space. Diameter of handbrake metal tube part is 20mm. Will this be ok ?

Orange is my new black

Ballistic orange 310s
manningpaul
manningpaul's picture
Offline
Last seen: 1 day 21 hours ago
Joined: 17/04/2014
Arrived this morning but dare not open as I might be tempted to get another one!! Thanks Mark.