WANTED Caterham engine wiring loom K Series ( SORTED I found one in my cellar Doh)

3 posts / 0 new
Last post
Rob Walker
Offline
Last seen: 8 hours 48 min ago
Joined: 17/04/2014
WANTED Caterham engine wiring loom K Series ( SORTED I found one in my cellar Doh)

I need an early Rover K series engine loom for a EU2 engine, this type was fitted to the 1.6/1.8 roadsports 1997 to around 2000.  Many thanks. Rob

Wrightpayne
Wrightpayne's picture
Offline
Last seen: 2 hours 48 min ago
Joined: 17/04/2014

Rob,

I believe the loom is just the std car engine loom thats about 15" too long for the seven. Have you thought of breakers?

Pretty sure you can buy all the plugs too to make one if you cannot find one!

Ian

Rob Walker
Offline
Last seen: 8 hours 48 min ago
Joined: 17/04/2014

Hi Ian,  

Thanks for your response, they have several differences to the stock loom including the master plug that connects it to the main chassis loom.  I find that after minor modification they suit the Duratec installation very well when using an Emerald K6 ecu and retain the Lucas 5AS immobiliser.

Rob