WANTED: K Series: Throttle bodies / Cams / Head

8 posts / 0 new
Last post
fordy
fordy's picture
Offline
Last seen: 13 hours 15 min ago
Joined: 17/04/2014
WANTED: K Series: Throttle bodies / Cams / Head

Hi folks,

I'm looking to get into some K series engine upgrades over the winter. Looking for interesting bits like a set of throttle bodies, ported head and hot cams, that sort of thing to marry with a Scholar 1.9 bottom end.

thanks in advance.

Carl.

fordy
fordy's picture
Offline
Last seen: 13 hours 15 min ago
Joined: 17/04/2014

@PROBE2 (Paul), your mailbox is full and I cannot respond to your BM. Thanks. Carl

TomB
Offline
Last seen: 4 hours 17 min ago
Joined: 17/04/2014

There i sa set of the Superlight R Rover KV6 based throttle bodies on eBay at the moment.  

https://www.ebay.co.uk/itm/MG-Rover-K-Series-Throttle-Bodies-VHPD-ZR-Caterham-Lotus/284041880904?hash=item4222372548:g:bdcAAOSwJ0tfgxiK

fordy
fordy's picture
Offline
Last seen: 13 hours 15 min ago
Joined: 17/04/2014

Thanks Tom but looks like they sold very quickly

TomB
Offline
Last seen: 4 hours 17 min ago
Joined: 17/04/2014

So they have - they were available this morning! 

simon_h
simon_h's picture
Offline
Last seen: 4 hours 54 min ago
Joined: 17/04/2014

If you were thinking of spending that much I would suggest looking at the qed badged jenvey bodies. They are cheaper than those ones went for 

fordy
fordy's picture
Offline
Last seen: 13 hours 15 min ago
Joined: 17/04/2014

still looking for a set of throttle bodies and a set of Piper 285 or 1444 cams (or similar) for VVC.

TomB
Offline
Last seen: 4 hours 17 min ago
Joined: 17/04/2014

There are some Roller Barrel TB on eBay now too, starting at £1500.