5 posts / 0 new
Last post
K7 VCT
K7 VCT's picture
Offline
Last seen: 1 hour 35 min ago
Joined: 17/04/2014
New speed sensor
Hi all, so my new speed sensor has finally arrived second time around from Caterham. It has to be screwed a long way through the plastic top hat adapter to get close to the ring on the drive shaft. However it's very tight and I think it will break .....if I have to get mole grips on it.... Anyone had same issues
Nigel B
Nigel B's picture
Offline
Last seen: 2 hours 34 min ago
Joined: 17/04/2014

I fitted one of those recently & I can't recall having any problems with it. I think the sensor screwed through the top hat part relatively easily. Plenty of lubricant perhaps?

ian.pursglove
ian.pursglove's picture
Offline
Last seen: 4 hours 14 min ago
Joined: 25/06/2018

I replaced mine after a minor amount of excess suspension travel [ahem]; sensor through the top hat was not a problem, but the screw on the other side as well was designed for someone with much smaller fingers than me.

Eek

ChrisC
Offline
Last seen: 1 hour 41 min ago
Joined: 17/04/2014

I find the sensor gets tight in the top hat if the top hat is fitted and locked into place.

K7 VCT
K7 VCT's picture
Offline
Last seen: 1 hour 35 min ago
Joined: 17/04/2014
Trying to wind the sensor in before top hat fitted....

Orange is my new black

Ballistic orange 310s