Area Representative Bizzielizzie13 Posted April 29, 2021 Area Representative Share Posted April 29, 2021 I'm fitting a battery master switch to our 2012 R300 Duratec. Could any kind person please 'post' a copy of the relevant page from the build manual & the ignition wiring diagram. It is the detail in positioning the switch & the ignition supply that is my concern.Thanks David. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted April 29, 2021 Member Share Posted April 29, 2021 Private Message sent. Link to comment Share on other sites More sharing options...
R300 FNL Posted April 30, 2021 Share Posted April 30, 2021 I would be interested in this aswell if anyone has any info on the fitting of the switch etc. I take it the scuttle panel does t need to come off. Thanks Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted April 30, 2021 Member Share Posted April 30, 2021 Private Message sent. Link to comment Share on other sites More sharing options...
Area Representative Golf Juliet Tango Posted April 30, 2021 Area Representative Share Posted April 30, 2021 This is in the Guides, isn't it?https://www.lotus7.club/guides/how-guides/fitting-battery-master-switchExactly what the Guides are for. What would be really useful is if someone would do some research & curation to extend them. We need a keen research volunteer to do this.It is almost certainly in the LowFlying archive too. Link to comment Share on other sites More sharing options...
Area Representative Bizzielizzie13 Posted May 1, 2021 Author Area Representative Share Posted May 1, 2021 Thanks all for help & links etc.I just now need to find the correct ignition feed from the starter button (I don't have an ignition barrel) Caterham say there 'may be' a loop in the loom near where the switch fits......Cheers David Link to comment Share on other sites More sharing options...
raw Posted May 2, 2021 Share Posted May 2, 2021 Assuming that Caterham haven't changed the colours in the harness over the years, there should be 2 wires on the back of the starter button - white and white/red. White is the +12V supply from the battery/fusebox and white/red goes to the starter solenoid.Hope that helps?Andrew Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now