Jump to content
Click here if you are having website access problems ×

Carbon Airbox


Blackmamba

Recommended Posts

Hi

I am new to the forum and Caterham ownership so looking forward to Spring so I can get some use out of my car on road and track. It's a 2003 R400 and relatively standard apart from a cat bypass, currently fitted with a foam Pipercross air filter.

I am told I may have trouble getting on some quieter trackdays with this set up and that an R500 carbon airbox will help with noise. Would anyone who has made the switch be able to tell me how much difference it makes and if there are any other side effects? I presume I would lose some of the lovely induction roar, would the engine benefit from a remap / tune or is it a straight swap?

Any other advice, suggestions would be appreciated.

Thanks

Link to comment
Share on other sites

  • Leadership Team

Caterham no longer supply the original R500 carbon air box and s/h ones are few and far between. The kit as supplied by Caterham was a Caterham branded Reverie "Silverstone" airbox plus filter and inlet ducting, and also an intake box that sat low at the front of the car. It's possible now to assemble a kit of Reverie supplied parts, I believe the cost is in the region of £650. There was a thread running recently on this.

My own car (SLR) is fitted with an original Caterham R500 airbox and it reduces the intake noise substantially, I've not had it tested back to back on the rollers with an open filter but when it was setup with the airbox fitted it certainly didn't seem to suffer any!

Stu.

Link to comment
Share on other sites

Thanks for the feedback. That's good to know they can be switched over without and any retuning. I have an opportunity to buy one of the Caterham carbon air boxes so I will probably get it just in case. This one has a filter attached to the end and does not have the inlet ducting and intake box mentioned.

Link to comment
Share on other sites

  • Leadership Team

Noise restrictions are only going one way, excellent if you can get your hands on one! 
The main parts you need are the airbox, filter and collector:

310E5479-086D-414F-99B1-404E406DB3AB.jpeg.fe681dc96bfab70ab3c7261cdc3a3152.jpeg
 

6B29E35B-3CCB-483F-8E2F-9F01B4ED6617.jpeg.9ad86c0ba5e526419490761d3f2c8b08.jpeg

The filter fits between the airbox and collector.

The ducting is readily available from the likes of Demon Tweeks:

3579B1C4-8FC5-407E-976F-21B5C4A943A6.jpeg.5645d0e851a97861980f8043f86cffb0.jpeg

Stu.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...