Felixgogo Posted May 20, 2020 Share Posted May 20, 2020 Hi - I'm the planning process of fitting a guarded red toggle switch to my S3 seven, and all the usual places for this switch seem a bit comprised, i.e. too close to the steering wheel and all the danger of switching off by mistake whilst cornering.Where have everyone else placed their guarded ignition switches.....? Link to comment Share on other sites More sharing options...
Tazio Posted May 20, 2020 Share Posted May 20, 2020 Mine is between the oil pressure guage and the temp guage. ideal for me. One thing to be careful of is how close it is to the tonneau, I shortened the bottom of the mounting bracket by 2 to 3mm to get it as low as possible between the two guages. Link to comment Share on other sites More sharing options...
Felixgogo Posted May 20, 2020 Author Share Posted May 20, 2020 thanks - that's exactly where I'd like mine - but I must have a different dashboard to you, there's a tube running across the dashboard just below there - there's no way the switch with it's toggle guard could fit there.I'm stumped... Link to comment Share on other sites More sharing options...
Felixgogo Posted May 23, 2020 Author Share Posted May 23, 2020 In the end I didn't like the guarded toggle, it was too plasticky, so I placed the switch by itself between the oil pressure and temp gauge, as Tazio recommended, I think it looks OK. Link to comment Share on other sites More sharing options...
Tazio Posted May 23, 2020 Share Posted May 23, 2020 Mine is above the guages where the little light is on yours, far enough out the way not to get knocked. Link to comment Share on other sites More sharing options...
Sooty Posted May 23, 2020 Share Posted May 23, 2020 Have a look at my profile picture Link to comment Share on other sites More sharing options...
Sooty Posted May 23, 2020 Share Posted May 23, 2020 Link to comment Share on other sites More sharing options...
Felixgogo Posted May 22, 2021 Author Share Posted May 22, 2021 Sorry to bring up an old thread - but I managed to get the seven out for a quick warm up drive, and during the journey by mistake turned off the ignition whilst fumbling for the indicators!So I swapped the switch for a locking APEM switch, so one has to pull on a spring loaded part to the toggle, to move it from either position. A little more insurance I hope. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now