JNC Posted July 4, 2017 Share Posted July 4, 2017 I saw these in Classic Sports Car ! A bit expensive but will work under a dark 7 dashboard. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted July 4, 2017 Member Share Posted July 4, 2017 I ike the idea, and I think this is the first I've seen with a brand name of which I've heard.Now... how about resettable circuit breakers with LEDS?Jonathan Link to comment Share on other sites More sharing options...
Roger Ford Posted July 4, 2017 Share Posted July 4, 2017 Get mine from Vehicle Wiring Products - 60p each. Link to comment Share on other sites More sharing options...
Area Representative gileshudson Posted July 4, 2017 Area Representative Share Posted July 4, 2017 These Gunson ones are only 61.8p each Roger... there's 42 in the pack Link to comment Share on other sites More sharing options...
colindavies56 Posted July 4, 2017 Share Posted July 4, 2017 already fitted. Link to comment Share on other sites More sharing options...
JNC Posted July 4, 2017 Author Share Posted July 4, 2017 Nothing like sharing the knowledge with everyone else !! Those who have tried them and are using them have you found any problems you might like to share ? Link to comment Share on other sites More sharing options...
Roger Ford Posted July 4, 2017 Share Posted July 4, 2017 Seem to work fine as fuses - not had one blow since I fitted them so don't have any comments about how well the LEDs work. Link to comment Share on other sites More sharing options...
Ian B Posted July 4, 2017 Share Posted July 4, 2017 I've used them for some time.Had one go and it was really easy to instantly spot it had gone. I keep a few "normal" ones as well so I can replace the blown LED one with a normal one first to check the fault is no longer present, before fitting a new LED one. Link to comment Share on other sites More sharing options...
John Vine Posted July 5, 2017 Share Posted July 5, 2017 Beware -- some LED fuses have a cylindrical centre section, which stops them fitting a typical 7 fuseblock. (Ask me how I know this.)JV Link to comment Share on other sites More sharing options...
Andy Lef Posted July 5, 2017 Share Posted July 5, 2017 Go on then John - I'll bite! Link to comment Share on other sites More sharing options...
John Vine Posted July 6, 2017 Share Posted July 6, 2017 Simple, really, but very frustrating. I ordered a range of fuses from different ebay suppliers. Some fuses fitted ok but most didn't (although it took a long time with my head stuck down the footwell). I sent them back for a refund.JV Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now