Hanns Per Posted January 21, 2021 Share Posted January 21, 2021 1. Anyone changed the the original rear calipers to Hispec SVA Ultralite 2 golf lug with hand brake cable and 13 inch wheels? From what I have checked it should e possible. Any other solutions out here?2. Have big difficulties in getting respones from Hispec I try to buy these caliper since summer, placed an oder before Christmas, called the on an don but always promises but no feedback. Is everythin OK with Hispec. A year ago I changed to the Hispec front caliper, a aluminium rotor and Disc it works fine. But now I am stuck.Thks Hanns Per Link to comment Share on other sites More sharing options...
7 wonders of the world Posted January 21, 2021 Share Posted January 21, 2021 I did reply to noe of your other posts but its been deleted,I'm running UL4 up front and UL2 SVA on the rear of my S3 inside 13" rims, need to make your own handbake cable but tey fit no problem Link to comment Share on other sites More sharing options...
simon_h Posted January 21, 2021 Share Posted January 21, 2021 Probably they are screwed over by all the lockdown crap like everyone else Link to comment Share on other sites More sharing options...
Hanns Per Posted January 22, 2021 Author Share Posted January 22, 2021 thks good to read what is Your rear disc diameter and how high is the pad You use?? CSR road rear has a 255mm diameter disk and has a 40mm high pad. I am aware I have to change the cable, what diameter for the handbrake cable do You use? and do You use a 90 degree tube away from the caliper in order not to foul the rim or is it not necessary? Link to comment Share on other sites More sharing options...
7 wonders of the world Posted January 22, 2021 Share Posted January 22, 2021 Stand rear discs and I use Cable exits toward the rear of the car using a preformed nipple at the caliper end, the cables cross as it the enters the tunnel into a new compensator bar through which they are secured with a pair of solderless nipples on each inner, adjusters are fitted into the stock chassis mounts which I resized with some custom top hats.Inner cable diameter is - TBC cant get under the car are present as the jack is supporting the transmission as the engine is out. istr is was a motorbike brake cableRear pads are Ferodo FCP810R (DS3000) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now