Jump to content
Click here if you are having website access problems ×

noises...........


pkw2704

Recommended Posts

so still learning about the car,mine runs the 1.8K mated to the 6 speed box and standard sierra /cat diff.One thing i have noticed is transmission noise,is this normal ? if not what could be the culprit? 

is there a way of proving which area is causing the noise or is it a case of they all do that sir

i used to have a west..... 7 with a 2.0 vauxhall to a sierra 5 speed and lsd and it wasnt noisy

advice welcome

 

Link to comment
Share on other sites

Same set up and no real "extra noise" that I can comment on. 

Maybe, change gearbox/ diff oils. Grease propshaft at nipples. Check for loose bolts on anything, diff housing, gearbox mounts, and propshaft bolts.

Can you define the noise? Whining, clunking etc?

Link to comment
Share on other sites

whine in reverse, quite loud less of a whine forwards,there is a some clunking at low throttle made me wonder if its diff lash.oils have been done apparently,hoping its not g/box related .it could be deemed normal but i only have my last westy to compare to 

Link to comment
Share on other sites

The low throttle  clunk is that when you come on/ off the throttle lightly? could be simply the bolts mounting diff or more likely gearbox to body or even a bit of gearbox/ bodywork interference, either way as Scott said does not sound major.

Link to comment
Share on other sites

  • Leadership Team

I now have a CSR.  The rear is much, much quieter than my old Roadsport. 

It's very nerve-racking.  Without all the proper clunking going on behind me, I'm never quite sure I still have a back end!

*driving*

Link to comment
Share on other sites

Because i am new to Caterhams it took me by surprise,a little disappointed if I am honest the westy was quiet.Will look to see if anything is touching (which i doubt) and drop the prop and feel where most lash is .Does the sierra diff fit in the caterham or is it a ball ache?

Link to comment
Share on other sites

Check the mountings, they ane metal elastic bushes and should be fitted with shims. Check the diff is isolated properly and bushes are doing their  job. if the shims are incorrectly installed you can get metal to metal contact, transferring a lot of noise.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...