Screws for poppers

5 posts / 0 new
Last post
Mid Staffs AR
Mid Staffs AR's picture
Offline
Last seen: 6 hours 40 min ago
Joined: 22/11/2014
Screws for poppers

Is there a special type of self tapper with the right sort of countersunk head to fit the above?

I often find that if I use a high street self tapper with the right diameter, it can still interfere with the 'folded' button end

Rog

Jonathan Kay
Jonathan Kay's picture
Online
Last seen: 59 sec ago
Joined: 17/04/2014

I don't think that there's a special type. Suggestions of "M4" and "No 6" countersunk in the archives.

Jonathan

Sooty
Sooty's picture
Offline
Last seen: 12 hours 12 min ago
Joined: 20/09/2018

Csk pop rivets 4mm or 3/16"

David "Sooty" Sutton - Full blown Carbon Tart

Mid Staffs AR
Mid Staffs AR's picture
Offline
Last seen: 6 hours 40 min ago
Joined: 22/11/2014

thx all - forgot to mention that I'm fitting the boot cover which also has quite a thick metal strengthening bar, so will need a small diameter, long nosed rivet.....will investigate further Thumb Up

Rog Needham
Mid Staffs AR
[email protected]
07990 865869

Jonathan Kay
Jonathan Kay's picture
Online
Last seen: 59 sec ago
Joined: 17/04/2014

Do you know the nut trick if the nose of the gun won't go in far enough?

Jonathan