Wheel arch protectors

[p.mole1]

My wheel arches were in a right state due to the stainless panels not being fitted correctly. I took a gamble and bought these from Kit car direct and they covered all of the damage.

They required a fair bit of fettling, but both rear arches came off with no rivi nut trouble, unbelievable for a 25 year old car. 

 

 

[Tom_Arundel]

Are they the same length as the originals or longer?      Are they a good fit?

[John Vine]

They look very similar to Millwood's version, and a good bit cheaper!

JV

[p.mole1]

Hi, they are longer and wider, they fit quite well, however they needed cutting down to fit the K series and required a bit of work to tidy up the edges. As for fitting they require quite a few clamps and loads of trial fitting. You could only install them with the arches removed as you require quite a bit of clamping to get them to fit 

[John Vine]

Re #4:

Ah, not as good as the Millwood ones then.  They fit perfectly straight out of the box, and can be attached with the wheel arch in situ.

JV

[p.mole1]

They were very cheap, so I didn't expect much, but they were serviceable with quite a bit of work