TANGO7 Posted August 19, 2021 Share Posted August 19, 2021 All a bit above me, but on behalf of a friend who lives in Cyprus, am trying to source an ECU for a Sigma engined car. His current ECU, which requires replacement, has a number 38L036A and 00033528 on it. Can anyone help or point me in the direction of a replacement part? Link to comment Share on other sites More sharing options...
K7 VCT Posted August 19, 2021 Share Posted August 19, 2021 Surely caterham cars are the only place, unless someone has a 2nd hand one Link to comment Share on other sites More sharing options...
TANGO7 Posted August 19, 2021 Author Share Posted August 19, 2021 2nd hand one would be good! Link to comment Share on other sites More sharing options...
p.mole1 Posted August 21, 2021 Share Posted August 21, 2021 You can them tested and repaired Link to comment Share on other sites More sharing options...
simon_h Posted August 23, 2021 Share Posted August 23, 2021 A car in Cyprus is bound to be an eu spec Ford ecu. Even harder to replace than the mbe. CC is going to be the only place I’d say Link to comment Share on other sites More sharing options...
TANGO7 Posted August 24, 2021 Author Share Posted August 24, 2021 The car originally came from the UK and none the ones shown on CC's on line spares have numbers matching those detailed above. Don't think anyone is available in Cyprus to repair his existing one. Does anyone know if any other type (with a different number) would do as a replacement? Link to comment Share on other sites More sharing options...
aerobod - near CYYC Posted August 24, 2021 Share Posted August 24, 2021 You can use an MBE 9A4 ECU from SBD (https://www.sbdmotorsport.co.uk/MBE9A4-mbe9a4-ecu--fuel-injection-up-to-4-cylinders.html), but it would need an appropriate map. They may have one available, but otherwise it would require a rolling road session to tune. The 9A4 is an updated version of the 992 ECU that you currently have that is plug compatible and takes about 2 minutes to swap out.I would expect that Caterham should be able to sell you either an exact replacement or updated unit (such as a 9A4) with a map specifically for your engine configuration, if you send them an email explaining what you need. The Caterham part number is generally related to the software load, as opposed to the specific hardware, tying to specific engine requirements. Link to comment Share on other sites More sharing options...
K7 VCT Posted August 25, 2021 Share Posted August 25, 2021 Best to call up caterham Link to comment Share on other sites More sharing options...
K7 VCT Posted August 25, 2021 Share Posted August 25, 2021 Or even try sevens and classics in brands hatch, sure they can help out Link to comment Share on other sites More sharing options...
TANGO7 Posted August 26, 2021 Author Share Posted August 26, 2021 Thankyou for all your replies. I will forward them to my friend and he can decide on the appropriate course of action. I know, from a cost point of view, he would prefer to source a secondhand unit. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now